Change Climate
Change Climate - Bio-Epoxy Kit
Change Climate - Bio-Epoxy Kit
Couldn't load pickup availability
Change Climate Bio-Epoxy Kits, available for sampling and small DIY scale projects.
The limitless application of Change Climate Bio-Epoxy makes this product ideal for wet lay-up, coatings, infusion and for use in the development of bio-composites such as Hemp, Jute, Bamboo, Coffee Grounds, Wood Chippings or alternative materials with a sustainable binding agent.
✅ Odour-Free & Low VOC – Ensuring safe application in enclosed spaces with minimal environmental impact an without the need to evacuate close proximity premises during application.
✅ Non-Yellowing & UV Stable – Maintains clarity over time, even with exposure to sunlight, unlike traditional epoxies that yellow and degrade.
✅ Fast-Drying & Self-Levelling – Reduces installation time while ensuring a smooth, seamless finish.
✅ Superior Adhesion & Performance – Bonds strongly to concrete, timber, and other substrates, making it an ideal solution for high-traffic public facilities. Easy to separate and recycle at end of life.
✅ Australian-Owned & Manufactured – Supporting local innovation and sustainability, right here. Based in SA
Superior, Low Voc, Bisphenol Free Resin.
Includes
2-Part Kit of Resin + Hardener.
For larger quantities, please contact us for pricing.
NOTE: Avoid work in temperatures over 32 degrees C or in high humidity >75 (humidity may cause blushing). ONLY mix as much resin as needed as residual mass may heat up in volume. In case of vigorous smoke extinguish by dispercing the volume (tip out mix) or with sand or suitable extinguisher.
Mix Ratio@ 25degC: Mix ratio (weight) Bio-Epoxy | 77 Part A : 23 Part B
Mixing calculator: https://www.changeclimate.com.au/technical-details
Mixing:
Shake Part A gently for a long period, measure out only amount required into a measuring jug. Measure out required volume of Part B into a separate measuring jug. Add part A + B together to a metal pot/vessel, ceramic plate or foil tray & stir well (a drill bit stirrer is recommended). Pour from one vessel to another gently or use an agitator or vacuum to reduce the chances of air bubbles in resin
Application:
Applied thick the resin will self-level. Pot time 30-minutes, set time 12-24 hours - set when surface becomes smooth and loses grip/tack. Recoat once dry. Maximum hardness after 7 days.
Share
